Re: Looking for Neo-Geo schematics?

From: Andy Welburn <warlords_at_ntlworld.com>
Date: Tue Jul 30 2002 - 02:44:59 EDT

I think you will be dead lucky to ever find the schematics for the Neo Geo..
SNK are well known for their hoarding of information, especially the neogeo
as it would b a prime target for bootlegging..

i could be wrong, but i've never even heard of any schems for the neogeo
floating about.. ever.... even at commercial operators places.

Andy

----- Original Message -----
From: "Andrew Wilson" <andrew@aqualion.net>
To: <rasterlist@synthcom.com>
Sent: Tuesday, July 30, 2002 6:29 AM
Subject: RASTER: Looking for Neo-Geo schematics?

> I've got a Neo Geo 1-slot (MV-1F) I picked up off of ebay that I'm trying
to
> repair. The previous owner did something screwy with the video, as the
video
> ground line was crisped.
>
> Anyhow, after repairing the video ground, when I boot it up, it looks like
> I'm getting the test grid, but the board is not putting out any video sync
> (at least, none that my logic probe can detect). I'm getting signals on
the
> other video lines, just no sync.
>
> It's a 3-layer board, so it's hard to trace the circuit manually. Does
> anyone know where I can get a copy of the Neo Geo schematics? I've looked
at
> all the usual places, as well as at a bunch of NeoGeo places on the net,
but
> I just can't find any.
>
> Thanks for any help,
>
> -atw
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to rasterlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jul 29 23:47:26 2002

This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 17:51:30 EST