RE: Defender power supply requirements

Don't forget that ether +5 or the +12 (I don't remember) needs to have a
large cap to allow one of the voltage lines to come up slower during
boot up, I believe this had to do with the memory backup, of course I be
wrong;)

-----Original Message-----
From: owner-rasterlist@synthcom.com
[mailto:owner-rasterlist@synthcom.com] On Behalf Of Stempak
Arcadius-ASTEMPA1
Sent: Wednesday, February 19, 2003 3:03 PM
To: 'rasterlist@synthcom.com'
Cc: Stempak Arcadius-ASTEMPA1
Subject: RE: RASTER: Defender power supply requirements

Neil,
*****

 You are correct, in fact many
a people have sold Modified P.C.
Type Power Supplies on Ebay in
the Past which included a Modified
Wiring Harness, applicable for early
Williams Game Use, I.E. Robotron,
Defender, Joust, etc...

Arcadius..........

-----Original Message-----
From: Neil Bradley [mailto:nb@synthcom.com]
Sent: Wednesday, February 19, 2003 4:47 PM
To: rasterlist@synthcom.com
Subject: RASTER: Defender power supply requirements

Any idea what the crurent supply/voltage supply requirements are for
Defender? If I read the schematics right, it needs +12, +5, and -5. I am
unsure of the power consumption requirements.

It almost looks as if a PC's power supply would do the trick. Am I wrong
about this?

Thanks!

-->Neil

------------------------------------------------------------------------

----
---
Neil Bradley            In the land of the blind, the one eyed man is
not
Synthcom Systems, Inc.  king - he's a prisoner.
ICQ #29402898
------------------------------------------------------------------------
---
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
------------------------------------------------------------------------
---
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in
the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.