RE: Question about losing vertical deflection/repairing Nanao monitors?

Just a quick note - I've passed the suggestions I've gotten on to my friend,
and I'll let you all know the results.

-atw

P.S. The game on the monitor was Rush & Crash, AKA "The Speed Rumbler"

-----Original Message-----
From: owner-rasterlist@synthcom.com
[mailto:owner-rasterlist@synthcom.com]On Behalf Of Chris Bedwell
Sent: Saturday, April 12, 2003 6:27 AM
To: rasterlist@synthcom.com
Subject: Re: RASTER: Question about losing vertical deflection/repairing
Nanao monitors?

Have you tried adjusting your settings for v-height
and h-height ?

It looks to me like its firing ( the gun ) off the
screen and bouncing back from the side of the tube..

I had it before on a couple of 20" nanao's - they are
pretty tech friendly and almost NEVER break down, i
would swap 2 non name for 1 nanao any day !

Let me know a bit more - try adjusting that setting
first, then let us all know how it went..

- Chris.
www.myarcadegames.com

 --- Andrew Wilson <andrew@aqualion.net> wrote: > A
friend of mine has a Nanao monitor in his JAMMA
> cabinet (he's not sure how
> to figure out which model, unfortunately).
>
> His monitor works fine when you first power it up,
> but within a few seconds
> the image on the screen curls in on itself
> vertically until it's only a few
> inches tall. You can see the pictures here (the
> monitor is rotated 90
> degrees, but you get the idea):
>
>
http://www.aqualion.com/arcade/badmon/101_0167_r1.jpg
>
http://www.aqualion.com/arcade/badmon/101_0168_r1.jpg
>
http://www.aqualion.com/arcade/badmon/101_0172_r1.jpg
>
> Bonus points if you can guess what game that is :)
>
> Anyhow, he'd like to either try fixing it himself,
> or send it out to get it
> fixed. We've tried searching the net for any
> information or parts (capkits)
> for Nanao monitors, but they don't seem to be very
> common outside of Japan.
>
> Does anyone have any debugging tips for him? It's
> weird that it works for a
> few seconds, then shrinks...
>
> Thanks for any help,
>
> -atw
>
>
---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from rasterlist, send a message
> with "UNSUBSCRIBE" in the
> ** message body to rasterlist-request@synthcom.com.
> Please direct other
> ** questions, comments, or problems to
neil@synthcom.com.

=====

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Apr 16 21:15:54 2003