Re: Konami Circus Charlie Red Lines

From: John Robertson <jrr_at_flippers.com>
Date: Sun Jan 11 2004 - 18:56:52 EST

If these lines drift around a bit I would be checking the power supplies.
Looks to me like ripple on either the -5 or +12VDC supply. Might be on the
regular +5 as well...so check them all!

John :-#)#

At 02:37 PM 11/01/2004, Al Warner wrote:

>Hi Everyone,
>
>I have Circus Charlie board that works fine except that it had these bad
>lines going through the main screen. I did some checks on Google and
>someone asked a similar question about another Konami game, but got no
>answer. I have swapped out the video RAM so that's not it. I'm going to
>mess with the ROMs now (already cleaned), but any advise would be
>appreciated. Screen shots at http://www.alsarcade.com/cc/pics
>
>Thanks,
>
>-Al-
>
>-=-=-=-=-=-=-=-=-=-=-=-=-
>Visit Al's Arcade
>http://www.alsarcade.com
>-=-=-=-=-=-=-=-=-=-=-=-=-
>
>
>
>---------------------------------------------------------------------------
>** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Jan 11 18:57:01 2004

This archive was generated by hypermail 2.1.8 : Sun Jan 11 2004 - 20:50:00 EST