Re: Re[2]: WTB: Atari Euro Coin Door

Ok, precise.
Single coin door to fit opening 12.75" x 10.125"
with frame
prefer stainless
coin mech config is irrelevant to me, but prefer 2 coin w/lighted
rejectors

Anything else?

Thanks for your help.

Steve

--- peter jones <highwayman2000@mail.ru> wrote:

>
> -----Original Message-----
> From: Teaganm <teaganm@yahoo.com>
> To: rasterlist@vectorlist.org
> Date: Tue, 6 Dec 2005 15:22:02 -0800 (PST)
> Subject: Re: RASTER: WTB: Atari Euro Coin Door
>
> >
> > I should have specified, the one I need is the older single door. The
> > Euro door is narrower and taller than the US door. It also does not
> use
> > the carrage bolts through the front.
> >
> i know what you meant,
> they come in 3 sizes,
> standard,narrow and new(obviously irelevent) very narrow and a bit
> taller.
> you get 2 finishes, stainless and black-paint.
> 2 frames - single or double.
> and more options related to what they are punched for in relation to the
> coinmech(s) than i care to list.
>
> that is why they are so common.
>
> so lets be precise.
> you need a standard door - stainless finish.
> do you need a frame with it?
> what coin-mech configuration?
> (blank/single/double/triple/mars/mars-cashflow/sentinel/azcoyen)
>
> i can probably find them if i know what your after.
>
>
---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Jan 9 11:43:59 2006