Zaxxon Electrohome Troubleshoot

I've recently finished a cap kit on my Zaxxon's
electrohome G07. I did the optional C303 upgrade.
I've triple checked that all the capacitors are in the
right places, their polarity, and if there are any
cold solder joints. To my eyes everything looks fine.
 Well I installed the board and now I get about 3/4 of
the screen. I can actually see the picture, it just
looks like it hits a wall 3/4 of the way across the
screen, and where it hits the wall it is really
intensely bright like everything is compressed into on
line.

I'm quite a novice when it comes to monitor repair.
Is there anything that jumps out to anyone that I
should check or replace? My B+ is steady at 120v and
I can get the picture to sit still, although H Freq.
is very touchy.

Here is a link to a picture of it:
http://farm3.static.flickr.com/2355/1844170619_c62b78e191_b.jpg
 

Thanks for any help!

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Nov 3 13:20:32 2007