Guided Fault...

From: John Robertson <jrr_at_flippers.com>
Date: Fri Mar 01 2002 - 02:56:16 EST

<x-flowed>

Got it scanned in, check for it on ftp.flippers.com/Fluke/PDFs . I have
done GuidedFault-3-4-9-20.s which is program 3, 4, 9, and the start of the
listing for program 20.

There remains the following:
Program 3, 4, 9, 20 (page 12) - John :-#)#
Program 21 (bottom of page 12, page 13, middle of 14)
Program 22 (mid 14 - mid 17 (longest one...)
Program 23 (mid 17 - top 18)
Program 24 (top 18 - bot 18)
Program 25 (bot 18 - top 19)
Program 26 (top 19 - bot 19)
Program 27 (bot 19 - bot 20)
That's all.

So if there are any volunteers, could they put their name behind a program
number? Like mine.

My "GuidedFault-3-4-9-20.s" is one directory up (Fluke), you can add to it.

Remember that the comments are deliniated with a '!', and the line of
program must be in a single line, that is if you are using RKSIC.EXE as the
compiler.

I find that wordpad works fine for writing these up and then save in
unformated text and change the ending to ".s" from the ".txt" that wordpad
likes...

This booklet is great reading for explaining how to layout programming
steps to handle setting up guided fault isolation routines.

John :-#)#

</x-flowed>
Received on Fri Mar 01 07:56:06 2002

This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:41 EST