Re: Guided Fault...

From: Peter Fyfe <peter_at_bombjack.freeserve.co.uk>
Date: Mon Mar 04 2002 - 17:00:14 EST

Guys,

I've type up programs 23 to 27 and sent them to John. Hopefully that should
be us covered.

Regards

Peter

----- Original Message -----
From: John Robertson <jrr@flippers.com>
To: <techToolsList@flippers.com>
Sent: Friday, March 01, 2002 5:26 PM
Subject: Re: Guided Fault...

>
> At 11:56 PM 28/02/2002 -0800, John Robertson wrote:
>
> >Got it scanned in, check for it on ftp.flippers.com/Fluke/PDFs . I have
> >done GuidedFault-3-4-9-20.s which is program 3, 4, 9, and the start of
the
> >listing for program 20.
> >
> >There remains the following:
> >Program 3, 4, 9, 20 (page 12) - John :-#)#
> >Program 21 (bottom of page 12, page 13, middle of 14) - Kev
> >Program 22 (mid 14 - mid 17 (longest one...) - Jon R
> >Program 23 (mid 17 - top 18) - John :-#)#
> >Program 24 (top 18 - bot 18) - ?
> >Program 25 (bot 18 - top 19) - ?
> >Program 26 (top 19 - bot 19) - ?
> >Program 27 (bot 19 - bot 20) - ?
> >That's all.
> >
> >So if there are any volunteers, could they put their name behind a
program
> >number? Like mine.
> >
> >My "GuidedFault-3-4-9-20.s" is one directory up (Fluke), you can add to
it.
> >
> >Remember that the comments are deliniated with a '!', and the line of
> >program must be in a single line, that is if you are using RKSIC.EXE as
> >the compiler.
> >
> >I find that wordpad works fine for writing these up and then save in
> >unformated text and change the ending to ".s" from the ".txt" that
wordpad
> >likes...
> >
> >This booklet is great reading for explaining how to layout programming
> >steps to handle setting up guided fault isolation routines.
> >
> >John :-#)#
>
>
Received on Mon Mar 04 14:58:52 2002

This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:41 EST