Re: Pod Self-Test Error

From: John Robertson <jrr_at_flippers.com>
Date: Wed Sep 25 2002 - 03:04:49 EDT

<x-flowed>
For the most part I find that error is a bad connection to the self test
socket. Try sliding the plug sideways in the test socket with it partially
engaged. This works for me...

You DO put the pod's plug into a 40 pin socket to insert into the UUT don't
you?

John :-#)#

At 01:33 AM 25/09/2002 -0500, Mark Shostak wrote:

>Gang,
>
>Anybody seen this or is it just my luck:
>
>Lately (in the last 6 to 12 months), I have come across a lot of pods
>which fail their self test with an error '00' code.
>
>The pods all seem to work fine when used in an actual UUT,
>but whine when tested.
>
>I've seen this on multiple pods and multiple 9010s.
>
>Not really sure what an error 00 is, either.
>
>Since it's not service affecting, I haven't bothered to dig into it,
>but thought I'd ask before possibly wasting time on an issue someone
>else has already wasted time on.
>
>Anyone seen this?
>
>-Mark

</x-flowed>
Received on Wed Sep 25 00:14:56 2002

This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:48 EST