Re: Fluke 90 Series designer found!

From: John Robertson <jrr_at_flippers.com>
Date: Sun Oct 20 2002 - 18:08:14 EDT

<x-flowed>
Update,

Heard back from Mike (the designer of the Fluke 90 series) and he still has
lots of info on these. He said he would copy some of it and send it off at
some point... Apparently he has modules for the 90 tester to change it to
work with 6502 and 6809s...

Stay tuned...

John :-#)#

At 11:13 AM 24/09/2002 -0700, John Robertson wrote:
>I was chatting with Shy (www.Navatek.com - spare 9100/9010 parts) and I
>asked him about the Series 90 that Fluke/PHILIPS produced in the early
>90's and he said it was the design of a guy named Mike in Calgary, Canada!
>
>This is a device that can clip onto a Z80 or 8085 CPU (some of the 6XXX
>family is supported too it seems) and it will cycle steal from the UUT and
>allow you to run RAM, ROM etc tests. Nice hand held unit...
>
>So if anyone has one of those items sitting on a shelf I am going to try
>and get the schematics, etc for them.
>
>Mike's away for a few days but stay tuned!
>
>John :-#)#

</x-flowed>
Received on Sun Oct 20 15:29:44 2002

This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:49 EST