RE: [techtoolslist] Uploading binary images from Fluke 9010a

From: Matthew Rossiter <matt_at_veriosc.com>
Date: Thu Oct 09 2003 - 02:24:08 EDT

According to this manual I can at least make a backup copy of the tape onto
other tapes. So, if anyone has a clock module and the async option
installed - but no tape let me know. I have lots of cassettes.

Matt

-----Original Message-----
From: owner-techtoolslist@www.flippers.com
[mailto:owner-techtoolslist@www.flippers.com]On Behalf Of John Robertson
Sent: Wednesday, October 08, 2003 8:43 PM
To: techtoolslist@www.flippers.com; techtoolslist@www.flippers.com
Subject: RE: [techtoolslist] Uploading binary images from Fluke 9010a

Clock module pdf is on TTL ftp.
ftp.flippers.com/TTL/Fluke/PDFs/9000A-006Async_SignatureProbeService.pdf

John :-#)#

At 07:27 PM 08/10/2003 -0700, Matthew Rossiter wrote:

>It would be cool if you (or someone) could figure that out. I don't think
>you can use the clock module without the tape program.
>
>Is there any documentation on using the clock module somewhere?
>
>
>Matt
>
>-----Original Message-----
>From: owner-techtoolslist@www.flippers.com
>[mailto:owner-techtoolslist@www.flippers.com]On Behalf Of James Bright
>Sent: Wednesday, October 08, 2003 6:51 PM
>To: techtoolslist@www.flippers.com
>Subject: RE: [techtoolslist] Uploading binary images from Fluke 9010a
>
>
>
>I'll have to pull that up and check it out. If I remember right though,
>that just says how to insert binary data but it does not tell you what
>you can do with the binary data. My interest is piqued, so I will take a
>look.
>
>JB
>
>--James Bright
>www.QuarterArcade.com
>Restored Arcade Games for your Home
>
> > -----Original Message-----
> > From: owner-techtoolslist@www.flippers.com [mailto:owner-
> > techtoolslist@www.flippers.com] On Behalf Of John Robertson
> > Sent: Wednesday, October 08, 2003 9:19 PM
> > To: techtoolslist@www.flippers.com; techtoolslist@www.flippers.com
> > Subject: RE: [techtoolslist] Uploading binary images from Fluke 9010a
> >
> > The binary code format is outlined in section 7 of the 9010A
>programming
> > manual.
> >
> > John :-#)#
> >
> > At 08:18 PM 08/10/2003 -0400, James Bright wrote:
> >
> >
> > >Is that how they come to you when you send them to your PC? It would
>be
> > >very interesting to know what that binary information is. I don't
>think
> > >it's a huge problem to reverse engineer and document the Fluke 9010A
> > >API. This would probably shed some light on how some custom commands
>are
> > >implemented. My suspicion is that it uses an undocumented "load z80
> > >assembly" command.
> > >
> > >JB
> > >
> > >--James Bright
> > >www.QuarterArcade.com
> > >Restored Arcade Games for your Home
> > >
> > > > -----Original Message-----
> > > > From: owner-techtoolslist@www.flippers.com [mailto:owner-
> > > > techtoolslist@www.flippers.com] On Behalf Of Matthew Rossiter
> > > > Sent: Wednesday, October 08, 2003 7:43 PM
> > > > To: techtoolslist@www.flippers.com
> > > > Subject: RE: [techtoolslist] Uploading binary images from Fluke
>9010a
> > > >
> > > > What about the binary programs though? Look at programs 12 - 18
> > > > http://rossiters.com/games/fluke-async.txt
> > > >
> > > > Matt
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: owner-techtoolslist@www.flippers.com
> > > > [mailto:owner-techtoolslist@www.flippers.com]On Behalf Of John
> > >Robertson
> > > > Sent: Wednesday, October 08, 2003 3:52 PM
> > > > To: techtoolslist@www.flippers.com; techtoolslist@www.flippers.com
> > > > Subject: Re: [techtoolslist] Uploading binary images from Fluke
>9010a
> > > >
> > > >
> > > > James is correct, you can transfer the programs that are loaded
>with a
> > > > tape
> > > > out the RS-232 port and store on a PC. The software is on the TTL
>ftp
> > > > site
> > > > ftp.flippers.com/TTL/Fluke . RKSIC.exe is one of them
> > > >
> > > > John :-#)#
> > > >
> > > > At 04:45 PM 08/10/2003 -0400, James Bright wrote:
> > > >
> > > >
> > > > >For the program itself? I have not used the tape option myself,
>but I
> > > > >thought it was basically: (1) load the program(s) from tape, (2)
> > >transfer
> > > > >the programs loaded via RS-232 to computer. (I.e. RKSIC or FIDE).
> > > > >
> > > > >Or is there other binary data that is on the tape?
> > > > >
> > > > >JB
> > > > >
> > > > >--James Bright
> > > > >www.QuarterArcade.com
> > > > >Restored Arcade Games for your Home
> > > > >
> > > > >
> > > > >----- Original Message -----
> > > > >From: "Matthew Rossiter" <matt@veriosc.com>
> > > > >To: <techtoolslist@www.flippers.com>
> > > > >Sent: Wednesday, October 08, 2003 4:34 PM
> > > > >Subject: [techtoolslist] Uploading binary images from Fluke 9010a
> > > > >
> > > > >
> > > > > > Did anyone ever figure out how to transfer binary images such
>as
> > >those
> > > > on
> > > > > > tape for the clock module? I happen to have the tape with the
> > > > binaries,
> > > > >the
> > > > > > clock module and the Async. Sig. Option installed on my fluke
> > >9010a.
> > > > It
> > > > > > would be nice to keep an archive in case my tape goes bad or
> > > > something.
> > > > > > I'll have to do a little research on that.
> > > > > >
> > > > > >
> > > > > > Matt
> > > > > >
Received on Thu Oct 09 09:19:33 2003

This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 18:40:55 EST