<x-html><!x-stuff-for-pete base="" src="" id="0" charset="iso-8859-1/macintosh"><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2604" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I'm at an impasse trying to fix my broken 6809
pod. I've scoured the techtoolslist archive and have not found a solution. I'm
getting the pod timeout -attempting reset error message when using a 6809E
processor. Here's what I know: the pod works fine with a regular
6809, the dip switches are set right for the 6809E, the 6809E processor I'm
using works fine in a working star wars board, the clock source at the
input to U22 looks good on the scope, the U22 enable line is high,but the u22
output is stuck low. Therefore, there is no input on the processor EXTAL.
</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I think this is the problem. Where do I go
from here, replace U22? Before I go hacking around on a rare pod, I want
to make sure I'm on the right track.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Mark Hooks<BR>A.K.A.
Pinmania<BR>850-894-8103</FONT></DIV></BODY></HTML>
</x-html>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Sun Feb 13 17:07:51 2005
This archive was generated by hypermail 2.1.8 : Mon Sep 12 2005 - 19:58:49 EDT