When I load RAM from Master, the PROMs burn fine. When I load RAM from a
disk file, it stops at 100% and says 'Waiting on programmer...' (or very
similar words to that effect) and sits there until I cancel it. Any ideas?
Promlink appears to be controlling the 29B fine because verifies, burns, etc
from a master PROM work fine.
Any ideas?
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Sun Mar 20 16:52:35 2005
This archive was generated by hypermail 2.1.8 : Mon Sep 12 2005 - 19:58:49 EDT