Re: Fluke 9010A and Space Invaders

Phil,. I've used the 8080 pod on the 2 board and it
works fine.

I got that error once with one of the clock signals
being bad by a broken trace.

Evidently, the pod check out all the powers and the
clock signals going in for integrity.

Now, I have a Z80 pod with a uut power fail on a
galaga, but all the signals are looking good at the
socket.

John, do you have a definite to look for why the uut
power fail or pod timeout errors, what causes them?

Thanks
Tony

--- Phil Morris <phil@morris0.fsnet.co.uk> wrote:
> I have a Fluke 9010A with an 8080 pod - said
> combination works fine with
> every '3-layer' Taito Space Invaders boardset that
> I've used it with, but
> if I try it on *good, working* 'L-shaped' Taito
> boards I get the error:
>
> UUT Power Fail
>
> This has me puzzled - why should the Fluke work fine
> with one type of
> boardset, yet not the L-shaped set, even though said
> L-shaped sets work
> perfectly with an 8080 in the CPU socket?
>
>
>
> Thanks,
> Phil
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
>
http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Apr 13 13:54:22 2005