Re: Fluke 9010A and Space Invaders

Umm, go into the setup and disable the UUT Power Fail check??

I trust the power supply voltage isn't just too low down to the PSU or maybe
voltage drop across an adapter?

Soory, very obvious points i know, but you gotta mention them :)

On Wednesday 13 April 2005 20:57, Phil Morris wrote:
> >Phil,. I've used the 8080 pod on the 2 board and it
> >works fine.
> >
> >I got that error once with one of the clock signals
> >being bad by a broken trace.
> >
> >Evidently, the pod check out all the powers and the
> >clock signals going in for integrity.
>
> But that's the thing - the boardset *does* work perfectly with a normal
> 8080 in the CPU socket.
>
> I too was thinking of a clock signals problem, but they all check out okay.
>
>
> Phil
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Apr 13 14:14:24 2005