Re: fluke z8002 48-40 pin adapter pole position

<x-flowed>There is a sample PP test script in the FTP archives. THere is also a
Z8000 pod manual and an addendum (might be what you are looking for)
up in

ftp/flippers.com under TTL/Test Equipment/Fluke/PDFs .

John :-#)#

At 10:12 PM -0400 7/13/05, tony wrote:
>just bought a fluke z8000 pod
>it has a z8002 chip in it with a adapter in the pod
>on the cable to the uut it is 48 pin according to the manual it
>should have a 48 to 40 pin adapter to go to uut
>i did not receive this with the pod does anyone have the adapter
>or plans on how it should be built manual does not cover this .
>would like to try to adapt this for use with pole position
>any help with the adapter or on using it with pole boards
>would be great or if anyone has written any test scripts
>thanks tony
>
>
>
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist@flippers.com
>http://seven.pairlist.net/mailman/listinfo/techtoolslist

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                  www.flippers.com
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
</x-flowed>