Hi Folks,
I need one help from you guys…
One year ago, I last use my fluke, just to test one POD acquired on Ebay
(6809). It tested the pod Okay, I turned it of and left the 9010A unit on my
workbench unused for more than one year, due to a hurry in my job. Today,
for my surprise (a bad one), when I decided to troubleshoot one Pac Man
board, my fluke does not boot… just beeps every 3 or 4 seconds, and nothing
on the display…
I know it’s could be very difficult to diagnose it by email, but once I live
in a country that these devices are unknown, I don’t have some way to
service this stuff down here.
Try to fix it is the only way to have it working again, or pay about 300% in
customs taxes and shipping, drive about 200 miles to take it on the customs,
explain what hell is it for 100 people (unfortunately I live in a country
with too much burocracy), to get another one from Ebay… So, I’ll appreciate
any help !
Thank you very much !!!
José Luiz Martins
P.S. I’m asking your patience in advance for some English mistakes, I’m from
Brazil and my natural language is Portuguese… the unique country in South
America that speaks Portuguese :-( Thank you !
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Tue Oct 18 17:58:10 2005
This archive was generated by hypermail 2.1.8 : Tue Oct 18 2005 - 19:50:00 EDT