Re: Fluke 9010A Input voltage

From: Filip Hautekeete <fhaut_at_griffion.com>
Date: Tue Nov 01 2005 - 04:15:49 EST

Thanks guys... I've got every Fluke manual I ever wished for now ;-)

----- Original Message -----
From: "John Robertson" <jrr@flippers.com>
To: "Technical Tools Mail List" <techtoolslist@flippers.com>
Sent: Tuesday, November 01, 2005 3:57 AM
Subject: Re: [Techtoolslist] Fluke 9010A Input voltage

> Actually the Fluke docs are here ('borrowed' from TTL ftp site obviously!)
> glad to have them out there!
>
> http://fmbbowen.com:39353/VideoGames/DLH_DVDs/Test%20Equipment/Fluke/9010A%20Base/
>
> If you go back two directories you will find lots of old TTL and others
> archives.
>
> John :-#)#
>
> At 9:54 PM -0500 10/31/05, Franklin Bowen wrote:
>>Here are some docs for it (from the DLH DVDs):
>>
>>http://fmbbowen.com:39353/VideoGames/DLH_DVDs/Test%20Equipment/Eprom%20Programmer%20Software/Data-IO%20Unisite%20Programmer%20Software/
>>
>>
>>At 04:14 PM 10/31/2005, you wrote:
>>>Good point Rodger, I think that was hidden in the yada, yada part of the
>>>instructions for changing voltage that I didn't quote...
>>>
>>>Now to find the PDF of the 9010A manuals. They aren't up on the ftp site:
>>>ftp://ftp.flippers.com/TTL/Test%20Equipment/ the backup CD is buried
>>>somewhere in my shop...
>>>
>>>John :-#)#
>>>
>>>At 3:40 PM -0600 10/31/05, Rodger Boots wrote:
>>>>Be careful, a lot of times when you change voltage you also should
>>>>change the fuse.
>>>>In the case of the 9010A the line fuse should be 1A fast blow for 120 V
>>>>and 1/2 A fast blow for 240 V.
>>>>
>>>>
>>>>
>>>>Filip Hautekeete wrote:
>>>>
>>>>>Hello Steve,
>>>>> You are correct. Thanks to John Robertson I figured out there is a
>>>>> slide card for voltage selection behind the fuse panel. No need to
>>>>> drag the systems out of your garage ;-)
>>>>> Thanks for your help!
>>>>> Filip
>>>_______________________________________________
>>>Techtoolslist mailing list
>>>Techtoolslist@flippers.com
>>>http://seven.pairlist.net/mailman/listinfo/techtoolslist
>>
>>--
>>Franklin Bowen (Franklin@Bowen.net)
>>http://fmbbowen.com:39353/
>>
>>_______________________________________________
>>Techtoolslist mailing list
>>Techtoolslist@flippers.com
>>http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Tue Nov 1 08:07:16 2005

This archive was generated by hypermail 2.1.8 : Tue Nov 08 2005 - 00:50:00 EST