Hello, Gurus!
I need to write a value into a PIA, and then write a different value about 145 uS later. Is there a sensible way to time such a delay on the 9010A, or do I have to use a delay loop?
For the curious... this is to test the interface to a Bally Squawk and Talk board, from the MPU board.
Thank you for any help,
Mark Templeton
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Nov 9 07:23:56 2005
This archive was generated by hypermail 2.1.8 : Fri Nov 11 2005 - 14:50:00 EST