Re: Fluke 9100a

which system disks are serial # sensitive......ver 4......
I have another 9100a with ver 6.1 ...can I copy them over to the other......
finally got service disk v1.4 unserialize from Jimmy.........
also need display module for 9100a....any 9100a units for parts out
there......
put in a conner cp-3040a in and works fine ...just display bad (not quite
right).....
AL
----- Original Message -----
From: "Corey Stup" <Corey@Stup.net>
To: "Technical Tools Mail List" <techtoolslist@flippers.com>
Sent: Sunday, April 02, 2006 3:18 PM
Subject: Re: [Techtoolslist] Fluke 9100a

> AL SACCO_comcast wrote:
>> Loaded version 6.0 without any problems....
>> downloaded Ver 6.1 but wouldn't install....
>> comes up with error os:00f7
>> during sys disk 1 install.............
>> anyone have this problem.........
>> anyway to verify the disks on net with checksum ..............
> The images of 6.1 in the archive are damaged.
>
> I have a machine with 6.1 that I have made tar archives of all the files,
> but I've not had a chance to make install images from them as of yet.
>
> Note that there is very few differences between 6.0 and 6.1 I seem to
> remember only the editor and maybe one other change. Everything else was
> identical.
>
>
>
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Sun Apr 2 16:24:50 2006