Re: Fluke 9010

From: Martin White <martin_at_guddler.co.uk>
Date: Sun Nov 19 2006 - 10:08:42 EST

Nah, donıt worry about stripping it down, Iım gonna take mine apart and do
the tests on it see if I can see whatıs up with it. If itıs a fluke
programmed one then I wonıt have anything ­ sorry! Was just thinking that I
have a few boxes of unknown stuff and some are 40 pin :o)

On 19/11/06 14:48, "Chris Toseland" <Chris@muppzlab.co.uk> wrote:

> Hi Martin,
>
> From memory it was a mask programmed 804x series, I'd need to strip it down
> again to be 100% sure.
>
> Cheers
>
> Chris
>>
>>
>> -----Original Message-----
>> From: techtoolslist-bounces@flippers.com
>> [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Martin White
>> Sent: 19 November 2006 14:16
>> To: Technical Tools Mail List <techtoolslist@flippers.com>
>> Subject: Re: [Techtoolslist] Fluke 9010
>>
>> Chris,
>>
>> Whatıs the cpu? The service manual shows ³536094² but not too sure if this
>> is a Fluke part number or what? Is that the actual number on the cpu?
>>
>> Just read through some interesting stuff on the tape drives in the service
>> manual so I may open mine up at some point and see if I can work out whatıs
>> up with the drive. Used to work fine until it was stored for a few months.
>> When it came out of storage it no longer works. Never really bothered about
>> it too much since I have the RS232 option but it would be nice to get it
>> going again!
>>
>> Martin.
>>
>>
>> On 19/11/06 12:47, "Chris Toseland" <Chris@muppzlab.co.uk> wrote:
>>
>>
>>> Hi folks,
>>>
>>> This maybe a long shot but does anyone have or can duplicate the controller
>>> CPU for the tape drive unit on a 9010?
>>> My tape unit doesn't work, I've checked the sensors and even tried driving
>>> the CPU input pins directly all to no avail so I and can only assume that
>>> the CPU is dead.
>>>
>>> Thanks
>>>
>>> Chris
>>>
>>>
>>>
>>> _______________________________________________
>>> Techtoolslist mailing list
>>> Techtoolslist@flippers.com
>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>>
>>
>> --
>> Guddler's Domain
>> http://www.guddler.co.uk
>>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist

-- 
Guddler's Domain
http://www.guddler.co.uk

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Sun Nov 19 10:08:51 2006

This archive was generated by hypermail 2.1.8 : Sun Nov 19 2006 - 11:50:00 EST