MessageChris ,
Send me a email with address and I'll get you out one.....
8741 chip programmed and ready to go.................
AL
----- Original Message -----
From: Chris Toseland
To: Technical Tools Mail List
Sent: Thursday, November 30, 2006 2:54 PM
Subject: Re: [Techtoolslist] Fluke 9010
Hi AL,
Yes I'm still looking for a replacement CPU for the tape unit. However the days of me having access to equipment to program one are long gone.
Chris
-----Original Message-----
From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of AL SACCO_comcast
Sent: 27 November 2006 04:20
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Fluke 9010
Chris ,
still looking for 8041/8741 mpu for fluke 9010 tape reader ?
if so , let me know.....
AL
----- Original Message -----
From: Chris Toseland
To: TechToolsList@flippers.com
Sent: Sunday, November 19, 2006 7:47 AM
Subject: [Techtoolslist] Fluke 9010
Hi folks,
This maybe a long shot but does anyone have or can duplicate the controller CPU for the tape drive unit on a 9010?
My tape unit doesn't work, I've checked the sensors and even tried driving the CPU input pins directly all to no avail so I and can only assume that the CPU is dead.
Thanks
Chris
--------------------------------------------------------------------------
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
------------------------------------------------------------------------------
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Thu Nov 30 19:24:09 2006
This archive was generated by hypermail 2.1.8 : Thu Nov 30 2006 - 19:50:00 EST