> Has anyone tried reading ROM signatures on the Sega G80
> boardsets using the Fluke 9010a? I'm getting inconsistent
> signatures each time I tried to read each rom. I'm able to
> successfully read/write to the CPU and Vector Rams though.
> The boards all work fine with a normal Z80 processor
> installed, but I can't run the game with a Z-80 pod connected
> to it. Just wondering if anyone else has had the same
> problem. Matt _______________________________________________
I used the 9010a with the Sega multigame way back in the day and I don't
remember any gotchas, but I have seen similar behaviour with a 6502 pod and
my Tempest board. (I can't 'run' the game from the pod, although I can
examine and test memory just fine.)
You might try a different CPU in the pod, or another z80 pod if you have one
available.
-Clay
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Thu Apr 16 01:59:30 2009
This archive was generated by hypermail 2.1.8 : Thu Apr 16 2009 - 21:50:00 EDT