Help with a 68000 Pod

I have a 68000 pod and when I put it into self test mode, I get the following message on the 9100A.

"Pod name not yet known (please reset)"

I borrowed another pod (z80) and it tested fine (selftest and with a Ms Pac Man board).

Ideas?

B

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Wed May 13 13:25:17 2009