Re: Help troubleshooting a 9010A

Hooked up the 2nd 9010A. It returns:

R/W ERR @ C000 BTS 12 - LOOP?

Barry

----------------------

I been having trouble posting to the group... trying again.

I have 2 non-working 9010A units. On both they beep once, LEDs flash, then
nothing.

Hooked up a working 9010A that I borrowed (thanks David). Bus tests fine. RAM
returns the following:

R/W ERR @ C000 BTS 08 - LOOP?

Manual states:
If a RAM failure occurs, carefully examine the diagnostic message. The RAM
Test is usually sufficient for deducing the failed component directly.

It then does not explain how to read the message. :-) I am new to this, so be
kind if its a stupid question.

I deduced that there is a Read/Write error at C000. How do I "deduce" the
failed component?

Barry
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Tue May 26 21:41:17 2009