Re: 9010a RS232 problem?

It's not a pod problem, I can use the fluke normally w/o problem. I'm trying
to hook up the rs232 to a computer to upload scripts. It only resets after
hitting enter/yes after doing an Aux/if, read. while trying to send a script
to the fluke.

I've been trying to read up on the program to test the rs-232, but I've not
programed the fluke manually before, so It get's a little confusing manually
entering the program.

I have checked the power supply for problems etc when I first got it about 6
months ago.

On Sun, Jan 3, 2010 at 2:28 PM, John Robertson <jrr@flippers.com> wrote:

> Kevin Moore wrote:
>
>> Ok the holidays are over, and I'm back to trying to get my Fluke hooked up
>> to the computer so I can do scripts.
>>
>> Problem I'm having is that when I enter the following Aux/if , Read , Yes
>> the fluke resets after 1-2 secs.
>>
>> It will also do this with the serial port unplugged.
>>
>> I'm wondering if the is a normal action, like the Fluke is looking for a
>> signal from the com port to wait, or if there is a problem with my fluke..
>>
>> Thanks,
>>
>> Kevin
>>
>>
> Try leaving a pod hooked up in Self-Test and leave it running for a while -
> the machine should not reset...
>
> If it does then something may well be wrong with the 9010 and I would check
> the power supply first - looking for failing caps is the first item on the
> check list.
>
> John :-#)#
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Jan 3 16:17:41 2010