Re: 9010a RS232 problem?

Success!!

I reset all the comm port info in the Bios, and reset up everything.. Was
able to load a test script, and then compile one from qtr arcade..

One thing I noticed though from the script compiler from atr arcade. It
doesn't set trap active force line = no. No big deal just add that line to
the script and it works..

Not that it would make a difference, but when I do a rom test, I like to use
the more function to see what the sig actually is. That's helped a couple of
times to figure out that I put a rom in the wrong socket.

I can't wait to get to work on some scripts now!!

Thanks for all the input..

Kevin

On Fri, Jan 8, 2010 at 9:12 AM, Bill Karkula <wkarkula@comcast.net> wrote:

> If it's the same error as the serial Data I/O Promlink, you can ignore the
> error and continue - I think the program looks for two serial ports and
> reports the error since there is only one.
>
> Bill
>
> -----Original Message-----
> From: techtoolslist-bounces@flippers.com
> [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Kevin Moore
> Sent: Friday, January 08, 2010 7:42 AM
> To: jrr@flippers.com; Technical Tools Mail List
> Subject: Re: [Techtoolslist] 9010a RS232 problem?
>
> Ok I've found a U2 to be bad the MC14411 the D/A convertor, on the RS-232
> board. So now the fluke doesn't reset,
>
> The FIDE program is giving me an error of invalid port. Not sure how that
> could be since there is only 1 serial port, and I've got the program setup
> to use it.
>
> So I'm going to have to go through my setup again and double check
> everything, but progress is being made slowly.
>
> Kevin
>
>
> On Tue, Jan 5, 2010 at 11:33 AM, Kevin Moore <talon.k@gmail.com> wrote:
>
> > Yeah the script is the next thing I'm going to try as soon as I figure
> out
> > how to manually program this thing. Which is what I got the Rs-232
> optioned
> > one for in the first place, to avoid having to type on that keyboard more
> > than I have to.
> >
> > Kevin
> >
> >
> >
> > On Tue, Jan 5, 2010 at 10:29 AM, John Robertson <jrr@flippers.com>
> wrote:
> >
> >> Kevin Moore wrote:
> >>
> >>> It's doing a power on reset, after pressing "Aux i/f", then "Read",
> then
> >>> "Enter". It will state Receiving, then reset after about 2 secs. It
> then
> >>> comes back on stating Fluke 9000 restarted, self test ok.
> >>>
> >>> Kevin
> >>>
> >>>
> >>>
> >>> On Tue, Jan 5, 2010 at 8:28 AM, Tim Matthews <trmatthe@gmail.com>
> wrote:
> >>>
> >>>
> >>>
> >>>> -----Original Message-----
> >>>>>> From: techtoolslist-bounces@flippers.com
> >>>>>> Subject: Re: [Techtoolslist] 9010a RS232 problem?
> >>>>>>
> >>>>>> It's not a pod problem, I can use the fluke normally w/o problem.
> I'm
> >>>>>> trying
> >>>>>> to hook up the rs232 to a computer to upload scripts. It only resets
> >>>>>>
> >>>>>>
> >>>>> after
> >>>>>
> >>>>>
> >>>>>> hitting enter/yes after doing an Aux/if, read. while trying to send
> a
> >>>>>> script
> >>>>>>
> >>>>>>
> >>>>>
> >> If you have a second 9010 and a Z80 pod then you can use it to test the
> >> RS-232 card in your current machine - I seem to recall a script for
> doing
> >> that using a loop-back jumper...buried in the 9010 service manuals.
> >>
> >> John :-#)#
> >>
> >> Hi Kevin,
> >>>>
> >>>> Can you describe exactly what is being shown on the Fluke display when
> >>>> it
> >>>> fails?
> >>>> I'm not sure if you are describing the Fluke doing a Power-On Reset,
> or
> >>>> whether it's
> >>>> just dropping out of RX mode.
> >>>>
> >>>> cheers
> >>>> tim
> >>>> _______________________________________________
> >>>> Techtoolslist mailing list
> >>>> Techtoolslist@flippers.com
> >>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >>>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> >>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >>>>
> >>>>
> >>>>
> >>> _______________________________________________
> >>> Techtoolslist mailing list
> >>> Techtoolslist@flippers.com
> >>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> >>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >> --
> >> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
> >> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
> >> www.flippers.com "Old pinballers never die, they just
> flip
> >> out"
> >>
> >>
> >> _______________________________________________
> >> Techtoolslist mailing list
> >> Techtoolslist@flippers.com
> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >>
> >
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.725 / Virus Database: 270.14.130/2607 - Release Date: 01/08/10
> 01:35:00
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Jan 8 23:11:25 2010