Quick update.... I've bought a Zif Socket and some bits and bobs to make a
decent adaptor up - Thanks Guys....
----- Original Message -----
From: "Tim Matthews" <trmatthe@gmail.com>
To: "Technical Tools Mail List" <techtoolslist@flippers.com>
Sent: Tuesday, June 08, 2010 9:49 PM
Subject: Re: [Techtoolslist] Fluke Pods to Turned Pin Sockets - Help !!
That's the drawback with this approach, but a) I was lucky and found some
non-RoHS ZIFs that were being sold off cheap and b) even at £35 it's cheaper
than buying a sacrificial pod to nick bits from :)
I did find a source of 64pin sockets in 0.9" width suitable for 68k for
under £1 each in multiples of 10. I think it was RS and need to refind the
link so I can order some more.
tim/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Wed Jun 9 13:51:11 2010
This archive was generated by hypermail 2.1.8 : Thu Jun 10 2010 - 15:50:00 EDT