FLUKE 9100A SERIES QUESTION

From: AL SACCO_hm <asacco007_at_hotmail.com>
Date: Sun Nov 28 2010 - 21:34:03 EST

HELP FOR FLUKE 9100 USER

Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested....
if no pod is attached to 9100 during it comes up "no pod connected".....
if any pod is attached it comes up "enabled line caused timeout"
any idea or help would be helpful.....

AL SACCO
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Nov 28 21:38:47 2010

This archive was generated by hypermail 2.1.8 : Mon Nov 29 2010 - 08:50:01 EST