Not sure what I am missing but why don't you use the tool to make a disk from the image and see if it reads in the 9100?
I would also then archive the copied disk and diff the two image files. If all went right they should match.
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Thu Oct 13 22:10:13 2011
This archive was generated by hypermail 2.1.8 : Wed Oct 19 2011 - 18:50:01 EDT