Fluke 9100A/FT SMPS fault

From: Ness and Steve <mail_at_nessandsteve.plus.com>
Date: Sun Jan 29 2012 - 17:37:40 EST

Hello All,

My fluke 9100ft has developed a PSU fault that causes the mains to my work
shop to trip after around 3 minutes when turned on. I have completely
disconnected all outputs rails and bypassed the input filter and it does the
same.

 

So I have 2 options.

1. Repair the SMPS

2. Buy a replacement SMPS

 

Has anyone had similar problems.

Does anyone have a spare SMPS?

 

Cheers

Steve

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Jan 29 17:37:55 2012

This archive was generated by hypermail 2.1.8 : Sun Jan 29 2012 - 18:50:00 EST