Re: Kurz Kasch PDFs updated on Flippers

From: simon hanlon <simonhpt_at_googlemail.com>
Date: Fri Mar 09 2012 - 14:21:38 EST

Hi Guys,

I decided to ask a local PCB company to reproduce the blank cards for me,
they will be the same style but twice as deep, that way they can be used to
make any of the cards. They should be ready in 2 weeks. I will post a
paypal page showing the cards once they are ready.

Price wise they will be around $20 each....tooling/low volume costs.

If there are any cards that you are short on I may have the card and could
copy the component list/make a schematic for you.

Cards I have are as follows.
101a
102a
103a
111a
115a
116a
121a
123ab
124ab
173abc
180ab
185abc
188b
192a
196ac
200ab
213ab
215a
219ab
222abc
224abc
231abc
234bc
241ac
247ac
252abc
253a
257abc
261ab
265abc
266ac
269a
276ae
279ab
284b
290a
291ad
294ab
295a
299ab
306ab
309a
313abc
322ab
326ab
332ab
333ab
335a
336ab
337a
339a
341a
334ab
345ab
346a
348ab
351a
353a
355a
358a
359a
362a
363a
364abc
365a
366a
368a
369a
370ab
371ab
374a
375ab
377a
378ab
379a
380
381
382a
387a
388a
390a
392a
398a
400a
405a
408a
412a
415a
416a
417a
418a
420a
421a
422a
423a
424a
425a
426a

On Fri, Mar 2, 2012 at 2:50 AM, David Shoemaker <davids@oz.net> wrote:

> Learned another valuable lesson. Don't look behind the curtain.
>
> Started cleaning my unit up, at some point a cat had a litter on the deck
> so
> it was a little dirty :)
>
> Fuse holder was missing the plug, the front ground wire was chewed off and
> the deck edge connector was in serious need for a replacement.
>
> So I opened it up. Wow, does this thing look home brewed. A number of
> burnt insulation from soldering a mess o stuff inside a small space. Just
> a
> crazy mass of wires.
>
> Interesting unit. I like how the Univid did it with the power supplies
> internal. I would like to see a hybrid of the two units.
> -----Original Message-----
> From: techtoolslist-bounces@flippers.com
> [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Jeff Anderson
> Sent: Thursday, March 01, 2012 4:02 PM
> To: Technical Tools Mail List
> Subject: Re: [Techtoolslist] Kurz Kasch PDFs updated on Flippers
>
> I can scan these in soon:
>
> 111A Challenger
> 122B Tank (revision)
> 258AC Blockbuster
> 267AC URL Power Supply
> 269A 3-D Bowler
> 314AC Crash
> 325AD Game Plan Driver
> 338A The Poker Game (incorrectly labeled as 337A)
> 344ABC Draw Poker
> 364ABC Route 16
> 366A Crazy Climber (incorrectly labeled as 364A)
> 404A Swimmer (hand written)
> 414A Mr Do!
> 425A Liberator
>
> I might have a couple more.. I've been meaning to organize these cards
> into the file cabinets for a long time so this is a good enough reason
> to get motivated. It'll be quite nice to just have a single PDF for
> all the sheets.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Mar 9 14:21:49 2012

This archive was generated by hypermail 2.1.8 : Sun Mar 18 2012 - 19:50:01 EDT