Re: Samdisk looks very promising...

From: David Shoemaker <davids_at_oz.net>
Date: Mon Nov 26 2012 - 20:20:05 EST

Do I need the service disk to format my machine to use 6.1?

-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson
Sent: Monday, November 26, 2012 3:20 PM
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Samdisk looks very promising...

Andre Huijts wrote:
> I decided to write back the 6.1 images on my 6.0 floppies because 6.0 is
archived and safe anyway.
>
> I succesfully booted the system but it does show errors during boot up.
HOWEVER, this also happens with BOTH of the original 6.1 floppies I have.
> I believe that (at least some) errors are there because of me removing the
SCSI cable from the HD. Since the interface is still installed (and maybe
some dip-switch setting?) I think the 9100 assumes the HD still to be
there....
>
> Anyway, I think Samdisk did a perfect job, the errors are not to blame on
the program.
>
> One question:
>
> I still have another set of 6.0 but it has hand-written "9105" on it. I
THINK that this was only just to indicate to which system this set was
delivered or that it "belonged" to the 9105.
> Can anyone confirm there is no difference between V6.0 for the 9105 and
9100 ?
>
> I can try to boot from those disks and see if that boots error free.
>
> I could make a video of the boot process.
>
>
>
I too have had success with SAMdisk - extracted the TTL original 6.1
floppies from the zip file and was able to write them to fresh floppies
(with errors ignored by SAMdisk) and then able to boot my 9100FT with them.

What appears to be serialized is the TTL 9100 6.1 SERVICE disc, these are
matched to their machines and I did not work from a backup copy back in the
early 00s when this discussion was on.

I'm going to look inside that file (HexEdit) to see if the serial spot is
obvious or not and if so, try setting it to 0000 or FFFF to see if that
clears it.

John :-#)#
> Op 21 nov. 2012, om 19:03 heeft Andre Huijts <a.huijts@upcmail.nl> het
volgende geschreven:
>
>
>> I just deinstalled the special drivers for Omniflop and rebooted my PC,
this automatically reinstalled the default windows drivers for the floppy
drive.
>>
>> Then installed the fdrawcmd.sys file and copied Samdisk to my C: root.
>>
>> Started a command box and fiddled around with some of the commands.
>>
>> I got this info when doing the scan command:
>>
>> 83 Cyls, 2 heads:
>> 250Kbps MFM, 16 sectors, 256 bytes/'sector
>>
>> Then it started a list of what looks like info per track:
>> 0.0 0 8 1 9 2 10 3 11 4 12 5 13 6 14 7 15
>> 1.0 0 8 1 9 2 10 3 11 4 12 5 13 6 14 7 15
>>
>> The first digit is the tracknr., the second the headnr. The other nrs are
the sector numbers.
>>
>> All tracks show the same info.
>>
>> For tracks 80,81,82 it reports <blank> So it looks like the format is
>> 80 tracks.
>>
>>
>> Also did a "view" command and to my amazement I got to see all the bytes
in hex and ASCII per sector.....I could read some info that makes sense so I
guess at least Samdisk is reading the discs correctly.
>>
>> Now making images...
>>
>> Verstuurd vanaf mijn iPad
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org Archive site:
>> http://seven.pairlist.net/pipermail/techtoolslist/
>>
>
> André Huijts
> andre.huijts@upcmail.nl
>
>
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
>
>

--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Nov 26 20:20:37 2012

This archive was generated by hypermail 2.1.8 : Mon Nov 26 2012 - 22:50:02 EST