Re: Kurz-Kasch TC-590-89 Test Clip

From: John Robertson <jrr_at_flippers.com>
Date: Fri Feb 22 2013 - 19:42:33 EST

teeray wrote:
> Anyone know how a Kurz-Kasch TC-590-89 Test Clip is wired ?
> All I can find says it should have three test clips E4, B3, D3
>
> Thanks
> Tim
>
> _

These are part of the KK signature kit for 8080 boards. TC-590-89 is
basically a 16 pin Glomper clip with jumpers:

Part "EE Module" is a 40 pin header box that have only one jumper
between pins 14, 16 & 24.
Part "B-3" and "D-3" are a 16-pin glomper clips that each (identical)
have jumpers between pins 3, 6, 8, 10, & 13.
Part "E-3" is a 16-pin glomper clips that have a jumper between pins 1 & 7.

These four parts are used with KKs docs on using the Sig Analyzer on the
8080 boards and go on the corresponding IC (IC B-3, D-3, and E-3).

Hope this helps!

John :-#)#
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Feb 22 19:42:59 2013

This archive was generated by hypermail 2.1.8 : Fri Feb 22 2013 - 21:50:01 EST