Dip leads in liquid rosin flux before the solder pot.
On Aug 26, 2013 3:43 PM, "david grohowski" <electronicamuse@aol.com> wrote:
> about 15 years ago I used to buy refurbed ram and cpus from a company and
> I have never been able to duplicate their quality. their ICs' legs were
> clearly dipped into something like a solderpot. I have one with new solder
> bar and even if I clean the legs manually, then wash or clean with alcohol,
> etc, it never bonds like theirs. maybe in part it's because the parts I
> was trying to refurn were in bad shape to begin with. you arcade guys know
> exactly what I mean. anybody had good success stories?
>
>
> thx
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Aug 26 16:59:18 2013
This archive was generated by hypermail 2.1.8 : Mon Aug 26 2013 - 17:50:00 EDT