Re: 9100FT

From: Andrew Welburn <andy_at_andysarcade.net>
Date: Sat Dec 14 2013 - 14:21:27 EST

ok so maybe the patched disk is in the SAMdisk format, not Teledisk like
the rest...

i'm stuck until i can get a pc wit a floppy drive on the motherboard..

Andrew Welburn
http://www.andys-arcade.com

On 14/12/2013 16:15, Corey Stup wrote:
> On 12/14/2013 10:42 AM, Andrew Welburn wrote:
>> so i went back into the techtools FTP and found the v6 service disk
>> (SERVICE60.TD0), but i get the following error message when i try it
>> out on my 9100FT :
>> http://www.andysarcade.net/pix/DSC_1711.JPG
>>
>> "Fluke 9100A Service Init Disk, v6.0
>> This Board Has An Invalid Service ID"
>>
>> Does this mean it doesn't like the fact its a 9100FT (not 9100A), or
>> does it mean the disk is serialised to a particular machine? (i
>> thought by v6 they had done away with serialisation)
>>
>> now, there's another disk image on the FTP - 60SERV.dsk - but its in
>> the SAMdisk format, and i dont have an internal floppy drive any more
>> to build and test this one...
>>
>> could it be that these are two different types of v6 service disk? Can
>> anyone remember which is which?
> The 6.0 disk was originally serialized. I created a patch to remove the
> serial check at one point, and I thought I uploaded the patched disk.
> The 6.0 disk doesn't have the SCSI format tools so you still need the
> V1.4 disk as well.
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sat Dec 14 14:21:36 2013

This archive was generated by hypermail 2.1.8 : Fri Dec 20 2013 - 10:50:00 EST