Re: 6800 to 6502 pod combo ROM?

From: Rodger Boots <rlboots2_at_gmail.com>
Date: Sun Dec 29 2013 - 19:32:00 EST

REALLY stupid question, but you did also replace the 6800 with a 6502,
right?
On Dec 29, 2013 5:18 PM, "Troxelone" <troxelone@yahoo.com> wrote:

>
> I followed the guide at Klov and made the cuts and added the jumpers.
> Just wondering what I did wrong.
>
>
>
> > On Dec 29, 2013, at 4:58 PM, "John Doe" <zabanitu@mail.com> wrote:
> >
> > remember that to convert a 6800 pod to 6502 you maust change some
> jumpers, not the only one on the eprom's higher address line
> >
> >> ----- Original Message -----
> >> From: Theron Troxel
> >> Sent: 12/29/13 09:41 PM
> >> To: Technical Tools Mail List
> >> Subject: Re: [Techtoolslist] 6800 to 6502 pod combo ROM?
> >>
> >> I had a question on this, too. I am trying to convert my 6800 to 6502
> over the weekend and having problems getting it to work. Can you use the
> original ROM, and if so, how? I tried tying pin 19 to high, and my 9010a
> just beeps and won't turn on. If I cut the trace the fluke turns on, but
> then I get a TIMEOUT error on the pod when I self test. I would appreciate
> any help on this.
> >>
> >>
> >>
> >> On Saturday, November 9, 2013 2:32 PM, david grohowski <
> electronicamuse@aol.com> wrote:
> >>
> >> Excellent, thanks.
> >>
> >>
> >>
> >> david grohowski
> >> electronicamuse@aol.com
> >>
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: John Doe <zabanitu@mail.com>
> >> To: techtoolslist <techtoolslist@flippers.com>
> >> Sent: Sat, Nov 9, 2013 2:39 pm
> >> Subject: Re: [Techtoolslist] 6800 to 6502 pod combo ROM?
> >>
> >>
> >> eprom file is 540344
> >> http://arcarc.xmission.com/Test%20Equipment/Fluke/6800pod/
> >>
> >> it already contains firmware for 6800/6502 cpus.
> >> just toggle eprom pin 19 (a10)
> >> _______________________________________________
> >> Techtoolslist mailing list
> >> Techtoolslist@flippers.com
> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >>
> >>
> >>
> >> _______________________________________________
> >> Techtoolslist mailing list
> >> Techtoolslist@flippers.com
> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >> _______________________________________________
> >> Techtoolslist mailing list
> >> Techtoolslist@flippers.com
> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Dec 29 19:32:05 2013

This archive was generated by hypermail 2.1.8 : Sun Dec 29 2013 - 20:50:00 EST