At 12:41 PM 8/29/97 CDT, you wrote:
>In message "Amplifone HV", jwelser@crystal.cirrus.com wrote:
>
>> Fellow vector posse,
>>
>> I have good +-24V. I measured the following voltages (rounded) on the
>> BU406D (which I tested, and it looks good) B: -24V, E: -24V, C: +24V
>
>> BTW: If I didn't mention it explicitly, I'm not getting any high voltage. I
>> don't hear a high-pitched tone, or a crackle, or anything from the HV unit.
>>
>
>DC on the base? Did you check the oscillator?
Also make sure the high voltage "overvoltage" circuit is not triggering and
disabling the oscillator.
-Zonn
Received on Fri Aug 29 14:50:23 1997
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:00:55 EDT