> You also need to disable the watchdog reset. I lift the reset pin on my
> nop test cpu's and make a simple reset with a capacitor and pullup
> resistor. The nops that I make are just the cpu with the legs bent back
> over the body of the chip, wire the data pins (bent back) to the NOP
> instruction, lift the reset pin, and bend it over, then conect the mess
> to the +5 and Gnd legs (carefully). Works well...
>
What exactly are the data pins for the NOP instruction?
David
Received on Tue Jan 27 17:06:06 1998
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:08 EDT