Re: New Monitor: #3 CIRCUIT FOR REVIEW

Snubber. Wouldn't think you'd need it.

James Nelson wrote:

> I put in an open resistor "R2" in my design. It's not clear what the
> purpose of that resistor was in the WG design, but they used a 1.2K resistor
> there. Was it some kind of noise limiter or spike reducer? or was the
> feedback somehow pertinent?
>
> James
>
> ----- Original Message -----
> From: James Nelson <nelsonjjjj@didactics.com>
> To: <vectorlist@lists.cc.utexas.edu>
> Sent: Tuesday, November 09, 1999 12:39 AM
> Subject: New Monitor: #3 CIRCUIT FOR REVIEW
>
> > Check it out very carefully please. I changed out the sense resistor, but
> > the value may be too low?
> >
> >
> http://www.angelfire.com/nh/northamericantelecom/images/deflectionamp03.gif
> >
> >
> > Design comments, complaints, beatings, threats, and criticisms, as usual,
> > are requested. :-)
> >
> > Thanks everyone,
> > James
> >
> >
> >
> > http://www.angelfire.com/nh/northamericantelecom
> > low cost regular phone service click links to 6.9c or 5.9c no monthly
> fees!
> >
> >
> >
Received on Tue Nov 9 11:59:57 1999