In addition, missing horz or vert deflection can often be fixed by
re-flowing the solder joints at the header pins. Esp. as your
machine has been untouched for years. The B&W vector def. boards are
prone to this. Give that a shot...
James Hagen
> Did you check the deflection transistors that are mounted on the
chasis?
> Sounds
> like that could be your problem. You may want to just order a cap
kit from
> Bob Roberts and replace the other common fail points.
>
Received on Wed Dec 29 21:24:15 1999
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:01:12 EDT