Re: Asteroids Deluxe 12.096MHz xtal

Now that's freaky. I'm looking for the same crystals right now for my
Major Havoc boards. I've got two that are missing a few components on
each...

how timely ;)

tm

Jon Raiford wrote:
>
> Hmm.. I wonder if these were pulled to put on Major Havocs. Which other vectors
> used that 12.096?
>
> Josh: As far as your missing ones go, it will probably work fine with the 12.000, but
> someone found the 12.096's available on the net a couple months ago. Check the
> vectorlist archives.
>
> Do you have a non-working g05 HV cage? Why not just fix the one you have? They
> are pretty simple.
>
> Jon
>
> At 10:51 AM 01/13/2000 -0500, you wrote:
> >Hi all again,
> >
> >My Asteroids Deluxe is working perfectly now but I have two spare boards I'd
> >like to repair. Neither came up when I plugged them into the machine so I
> >began investigating. First thing I noticed, both spares had their crystals
> >(Y1) removed. This is supposed to be a 12.096 MHZ crystal but I can't find
> >any of these locally. Looking at the schematics, the counter simply divides
> >the crystal's frequency into the desired 6MHz shouldn't a 12.000 MHz clock
> >produce basically the same clock rate? (I ask because I can get a 12.000MHz
> >crystal right away as opposed to ordering one.)
> >
> >Also, does anyone have a good Electrohome HV cage for the B&W 19" Vector
> >monitor that they'd like to sell?
> >
> >Thanks for any help,
> > Josh
> >
> >---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Jan 13 08:49:19 2000