Re: Major Havoc chip question

Kind of interesting that the others were 6532. The Atari 2600 used 6507, 6532,
& Stella (TIA).

mike_ranger@dofasco.ca wrote:

> Well, I recently was given a tube, each of the following chips. Frank
> helped me identify them....
>
> AMI C010444D-01 C4075 TIA chips (I was told from the
> 2600 console only, any comments otherwise, given I got them from an
> operator, I suspect they might be in pins or vid's somewhere)
> 8319 C010750-03 6532 RIOT peripheral chips ( Star Wars vector,
> probably others)
>
> If they are of use to anyone!
>
> Mike
>
> > -----Original Message-----
> > From: Jon Raiford [SMTP:raiford@mindspring.com]
> > Sent: Thursday, January 13, 2000 1:53 PM
> > To: vectorlist@synthcom.com
> > Subject: Re: VECTOR: Major Havoc chip question
> >
> > There was some talk about repro'ing the Quad Pokeys, but some guy
> > apparently has a ton of NOS ones (I had almost talked Jrok into making
> > them until we found out about this). They are even being sold at
> > reasonable prices. Take a look a Deja.com and you should see it.
> >
> > So are the LETA chips available anywhere?
> >
> > Also, I would like to suggest that the vectorlist FAQ have cross
> > references for the DAC's and any other hard to find vector part.
> >
> > Jon
> >
> > At 11:35 AM 01/13/2000 -0700, you wrote:
> > >The quad pokey board is 40 pins. The only 24 pin custom chip on the Major
> > Havoc board is
> > >the LETA chip.
> > >
> > >tom mcclintock wrote:
> > > >
> > > > Could I be missing the Quad Pokey board? I found the chip on the
> > > > schematics, but again only listed as "Quad I/O". The MH board is a
> > > > conversion board, if that makes any difference.
> > > >
> > > > Assuming the empty socket is for a Quad Pokey board, are there
> > > > schematics around such that I could make my own?
> > > >
> > > > tm
> > > >
> > > > Jess Askey wrote:
> > > > >
> > > > > I wrote:
> > > > > >It is also used on Crystal Castles, Millipede, and any other
> > > > > > game after Marble Madness that uses a trackball or spinner
> > control.
> > > > >
> > > > > Make that... any 'Atari' game that uses a trackball or spinner. DOH!
> > :-0
> > > > >
> > > > > >
> > > > > > tom mcclintock wrote:
> > > > > > >
> > > > > > > I've got a Major Havoc board that is missing a 24 pin chip at
> > location
> > > > > > > "13Q". A look at the manual tell me that this is a custom chip,
> > but
> > > > > > > offers no further information. Anyone know what this is? Is it
> > the AVG
> > > > > > > chip for which Clay has just made a replacement?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > tom
> > > > > > >
> > --------------------------------------------------------------------------
> > -
> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > > > > > > ** message body to vectorlist-request@synthcom.com. Please
> > direct other
> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > >
> > --------------------------------------------------------------------------
> > -
> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > > > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > other
> > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > >
> > --------------------------------------------------------------------------
> > -
> > > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> > in the
> > > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > other
> > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > >
> > --------------------------------------------------------------------------
> > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> > in the
> > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > other
> > > > ** questions, comments, or problems to neil@synthcom.com.
> > >-------------------------------------------------------------------------
> > --
> > >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> > >** message body to vectorlist-request@synthcom.com. Please direct other
> > >** questions, comments, or problems to neil@synthcom.com.
> >
> > --------------------------------------------------------------------------
> > -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

--
Windows:
32 bit graphical interface for a
16 bit patch for an
8 bit operating system written for a
4 bit processor by a
2 bit company that can't stand
1 bit of competition.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.