Does it still crackle using the Deflection Board I loaned you? If not then you
know it is deflection board related and has nothing to do with the Transistors.
If it does it with both Deflection boards I would expect it is either the
transistors or some problem with the neck board.
I don't think you can isolate the HV from ground as ground is also provided
through the connector is it not?
Dan
On Sun, 13 Feb 100 17:21:42 -0500 (EST), you wrote:
>> "Gregg Woodcock" <woodcock@fastlane.net> wrote:
>>
>> Yes; the chassis transistors!!! Try swapping those and make CERTAIN the
>> ones on the "bad" monitor are properly insulated. I suspect the problem is
>> a poorly insulated transistor allowing the chassis to drift away from ground
>> and then short into the focus assembly from the frame...
>
>I checked and replaced all the mica insulators. Still same problem. So, I
>isolated the HV unit from the chassis ground to see if that fixed the
>problem... it didn't. Any other suggestions?
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sun Feb 13 17:49:53 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:30:58 EDT