On Thu, 24 Feb 2000, Walt wrote:
> HV Board Notes.
> On the HV circuit board there are two diodes which the Atari TM-183 manual
> does not identify. They are just referred to as "silicon diodes". Apparently
> the replacement for these is NTE558. Also be careful installing the zener
> diode ZD902. Apparently some people mistakenly install this at D902 instead
> of ZD902. The monitor will not work if you make this mistake!
Thanks for saving me the trouble of looking it up. Those are my notes
actually. I aquired a not-working Tempest with a botched install of a Zanen
kit. The ZD902 from the kit had been placed at location D902 -- with
explosive results. Diode bits everywhere -- glorious.
-Chris
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Feb 24 18:00:25 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:30:59 EDT