Re: HV chassis

From: Joel Rosenzweig <Joel_Rosenzweig_at_Agilent.com>
Date: Mon Apr 03 2000 - 15:18:24 EDT

You are right. I should have left room for that possibility. Based on my
memory, they looked just like my G05 deflection boards, but given how
similar they look, I shouldn't have been so confident!

Joel-

>You are probably correct about it being an Electrohome, there are burn
>marks where the two large resistors used to be. Still WG and Electrohoome
>looked very similar for the B&W, I'd have to pull my files to be sure.
>
>A potentially useful collection of parts for any Atari B&W vector game
>though, none the less.
>
>John :-#)#
>
>At 10:37 AM 4/3/2000 , Joel Rosenzweig wrote:
>>I'm not sure I follow you on the WG6100 deflection board. That board is
an
>>Electrohome G05 B/W deflection board. The two HV units appear to also be
>>from the Electrohome G05 monitor.
>>
>>The picture shows that the deflection board is missing one of the large
>>filtering capacitors. It would be impossible to say at this point if the
>>board was working before parts were removed, or if someone attempted and
>>never completed a repair job.
>>
>>Joel-
>>
>>
>>
>>-----Original Message-----
>>From: Tek <mypearl@dds.nl>
>>To: Vectorlist New <vectorlist@synthcom.com>
>>Date: Monday, April 03, 2000 1:10 PM
>>Subject: VECTOR: HV chassis
>>
>>
>> >Hi guys.
>> >
>> >Is this a HV chassis of a WG6100 or is it from a B/W vector? I am a
little
>> >confused because it is pictured with a WG6100 defl. board but the HV
cage
>>looks
>> >a lot different. Maybe it is another revision which I don't now of?
>> >
>> >http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=299732875
>> >
>> >Thanks!
>>
>---------------------------------------------------------------------------
>> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
>> >** message body to vectorlist-request@synthcom.com. Please direct other
>> >** questions, comments, or problems to neil@synthcom.com.
>> >
>>
>>--------------------------------------------------------------------------
-
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.
>
>
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
> http://www.flippers.com
> "Old pinballers never die, they just flip out."
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Apr 3 15:44:28 2000

This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:00:47 EDT