Re: Fluke 9010a tapes

Here's the post, and FYI, the archives are (currently) located at arlo.net.

http://www.arlo.net/vectorlist/archive/9910/0043.html

Braemar, Inc.
11481 Rupp Drive
Burnsville, MN 55337
Phone: (612) 890-5135
FAX: (612) 882-6550
E-mail: Braemar@BraemarInc.com
Contact: Stanley Borman, President

tm

Jeff Anderson wrote:

> about 6 months ago I posted the part # and braemar's phone #.. so I doubt
> its been archived. you can still get them directly from Braemar, but they
> are about $10 each as I recall.
>
> Jeff
>
> On Mon, 15 Jan 2001, Fish, David wrote:
>
> > on 6/24/99 Al Kossow wrote:
> >
> > The 9010's use Braemar micro cassettes. They are not the
> > same size as micro dictation tapes.
> >
> >
> > > -----Original Message-----
> > > From: Paul.Tonizzo@sybase.com [mailto:Paul.Tonizzo@sybase.com]
> > > Sent: Monday, January 15, 2001 9:55 AM
> > > To: vectorlist@synthcom.com
> > > Subject: VECTOR: Fluke 9010a tapes
> > >
> > >
> > > Greetings!
> > >
> > > I know there was a discussion concerning this in the past but:
> > > http://taupring.erols.com/vectorlist is down.
> > > I think the general consensus was that the tapes are special. I
> > > find it hard to believe that Fluke wouldn't just use the standard
> > > #$^&! microcassette tape. Can someone verify this is true for me?
> > >
> > > Also, is there anyone who knows where they can be had or who
> > > has spares they'd sell me.
> > >
> > > Thanks,
> > >
> > > Paul
> > >
> > > --------------------------------------------------------------
> > > -------------
> > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > > "UNSUBSCRIBE" in the
> > > ** message body to vectorlist-request@synthcom.com. Please
> > > direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> > >
> > ---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jan 15 21:39:38 2001