Well.. The Wells-Gardner 19V2000 is a 15" monitor, so that may not be the best solution for an Asteroids upright. The G05-801 was the monitor that came with Asteroids and expects 80VAC. The G05-802 (depending on the rev) can either be a 19" or a 15". The G05-802's expect 60VAC. About 75% of the G05's and V2000's I've seen, however, are bastardized monitors with parts from each tossed in. So its really hard to tell what you are looking at. Maybe a should write up a doc on identifying the various parts...
Anyway, If these are all complete and original monitors, and if the transformer assembly in the Asteroids is the 80VAC CT version, I would go with the G05-801. Before you make your decision, you should take a volt meter to the transformer and see what it is sending to the monitor.
Jon
At 06:03 PM 1/24/2001 -0800, you wrote:
>I'm rebuilding my Asteroids upright (my first vector project) and have all
>of these monitors available to me. My question is, Given the selection,
>why would I choose one monitor over another. Is any one more reliable?
>Is one easier to maintain? Thanks for your feedback.
>
>Steve
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Jan 25 08:01:25 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:22 EDT