Re: 19V2000 vs G05-801 vs G05-802

From: someotherguy <someotherguy_at_mediaone.net>
Date: Mon Jan 29 2001 - 12:25:32 EST

Sorry, mine had no manual. But it was clearly a 15V2000, complete with a
WG sticker on it that said so. I'm fairly certain I have chassis-view pics
of it from when I eBay'ed it a while back, and will post a link to them
when I get home. My friend's BZ mini also has this exact same
monitor. Wish I had a manual!

Richard

At 11:56 AM 1/29/2001 -0500, you wrote:
>So is there a manual for the 15V2000? I have only ever seen the 19V2000
>manual. I have an Omega Race mini that had a V2000 deflection board w/
>what I thought was a G05 chasis. I suppose its possible it was a complete
>15V2000, but I haven't seen any evidence online to support that
>claim. I'd love to see a manual if anyone can prove me wrong :)
>
>Jon
>
>At 11:08 AM 1/29/2001 -0500, you wrote:
> >Jon! Of course there is a 15" version of the V2000. It's called a
> 15V2000. I recently tore one out of a bagged Omega Race cocktail. :
> ) Now, I guess the question is, is there a 15" G05? Idunno.
> >
> >Richard
> >
> >At 08:51 AM 1/29/2001 -0500, you wrote:
> >>Doh! There I go confusing myself again.. If only it had been something
> a little less obvious :) Now, if I'm not totally mistaken.. I believe
> there is only a 19" version of the V2000 and no 15".
> >>
> >>Jon
> >>
> >>At 12:42 PM 1/26/2001 -0500, you wrote:
> >> >19V2000 is a 19" monitor, isn't it?
> >> >
> >> >-roy-
> >> >
> >> >----- Original Message -----
> >> >From: "Jon Raiford" <raiford@mindspring.com>
> >> >To: <vectorlist@synthcom.com>
> >> >Sent: Thursday, January 25, 2001 7:57 AM
> >> >Subject: Re: VECTOR: 19V2000 vs G05-801 vs G05-802
> >> >
> >> >
> >> > > Well.. The Wells-Gardner 19V2000 is a 15" monitor, so that may
> not be the
> >> >best solution for an Asteroids upright. The G05-801 was the monitor that
> >> >came with Asteroids and expects 80VAC. The G05-802 (depending on the
> rev)
> >> >can either be a 19" or a 15". The G05-802's expect 60VAC. About 75%
> of the
> >> >G05's and V2000's I've seen, however, are bastardized monitors with parts
> >> >from each tossed in. So its really hard to tell what you are looking at.
> >> >Maybe a should write up a doc on identifying the various parts...
> >> > >
> >> > > Anyway, If these are all complete and original monitors, and if the
> >> >transformer assembly in the Asteroids is the 80VAC CT version, I would go
> >> >with the G05-801. Before you make your decision, you should take a volt
> >> >meter to the transformer and see what it is sending to the monitor.
> >> > >
> >> > > Jon
> >> > >
> >> > > At 06:03 PM 1/24/2001 -0800, you wrote:
> >> > > >I'm rebuilding my Asteroids upright (my first vector project) and
> have
> >> >all
> >> > > >of these monitors available to me. My question is, Given the
> selection,
> >> > > >why would I choose one monitor over another. Is any one more
> reliable?
> >> > > >Is one easier to maintain? Thanks for your feedback.
> >> > > >
> >> > > >Steve
> >> > >
> >> > >
> --------------------------------------------------------------------------
> >> >-
> >> > > ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in
> >> >the
> >> > > ** message body to vectorlist-request@synthcom.com. Please direct
> other
> >> > > ** questions, comments, or problems to neil@synthcom.com.
> >> >
> >> >----------------------------------------------------------------------
> -----
> >> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> in the
> >> >** message body to vectorlist-request@synthcom.com. Please direct other
> >> >** questions, comments, or problems to neil@synthcom.com.
> >>
> >>---------------------------------------------------------------------------
> >>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >>** message body to vectorlist-request@synthcom.com. Please direct other
> >>** questions, comments, or problems to neil@synthcom.com.
> >
> >---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jan 29 12:41:38 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:22 EDT