> You can look at the FAQ on my web page, but there is no
> procedure I know of. I equated the knobs on the G08 HV unit
> to be similar in function to the knobs of the same name on
> the Amplifone HV unit.
>
The schematics for the -003 show at least four pots that I
can screw-up... ummm... I mean adjust. The Star Trek manual
I tried just said the pots were 'factory set', the Zektor
manual says 'DO NOT USE THESE CONTROLS' but neither say
what they do.
> What's wrong with your HV? No HV, or too low, or...?
>
The Hi-V reads 23.8kV, a little too high but not dangerously
so. I wanted to get it just right before I tackled the visible
'suppose-to-be-invisible', zero intensity, errr... retrace...
ummmm... lines. Just what do you call the lines that normally don't
show up anyway. I'm having one of those low IQ days :-/
Dave
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Feb 26 15:58:28 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:02 EDT